我公司致力于打造整体生态循环模式

  • 分类:公司风采
  • 作者:
  • 来源:
  • 发布时间:2019-03-04
  • 访问量:0

【概要描述】餐厨垃圾处理机实现源头处理源头利用,无二次排污,技术达到国际先进水平,处理后的有机残渣富含各种微量元素,餐厨垃圾处理机目前实现出口日本。我公司致力于打造整体生态循环模式。

我公司致力于打造整体生态循环模式

【概要描述】餐厨垃圾处理机实现源头处理源头利用,无二次排污,技术达到国际先进水平,处理后的有机残渣富含各种微量元素,餐厨垃圾处理机目前实现出口日本。我公司致力于打造整体生态循环模式。

  • 分类:公司风采
  • 作者:
  • 来源:
  • 发布时间:2019-03-04
  • 访问量:0
详情

Practical design method, precise calculation design method, common simplified design method and equal strength connection design method.

1. The practical design method is to splicing and connecting according to the net cross-sectional area of ​​the connected flange, and the connection of the web is calculated according to the shear force acting on the splicing position, and the net cross-sectional area of ​​the web should be The shear force of 1/2 of the shear capacity or the sum of the bending moments of the members is determined by dividing the shear force obtained by the net span length of the member.

Second, the exact calculation design method is that the flanges and webs of the connected members share the bending moment at the section according to the ratio of their moment of inertia, and the shearing force is all borne by the web.

Third, the commonly used simplified design method is to bear all the bending moments according to the flange of the member, and the web bears all the shearing force to carry out the splicing design.

Fourth, the equal strength design method is to splicing according to the strength of the connected flange or the net cross-sectional area of ​​the web. The principle of anti-seismic node design follows the principle of stress reduction and stress-saving and easy processing and installation. The most important point is to satisfy the principle of strong connection of weak components and avoid the overall damage of the structure due to weak connection. The purpose of the equal-strength joint design method is to make the bearing capacity of the joint of the member equal or higher than the bearing capacity of the member. Therefore, the equal-strength joint design method is often used for the structural splicing design of the structure according to the seismic design or the elastoplastic design to ensure the continuity of the component and good ductility.

扫二维码用手机看

暂时没有内容信息显示
请先在网站后台添加数据记录。
产品优势

联系方式

唐山市润亚环保科技有限公司

联系电话:13933405575

联系人:丁连宝

Copyright © 2020  唐山市润亚环保科技有限公司    冀ICP备20012204号-1    网站建设:中企动力唐山